Wednesday, April 10, 2013

Total knee replacement

Total Knee Replacement or TKR is a surgical procedure whereby the diseased knee joint is replaced with artificial material. During a total knee replacement, the end of the femur bone is removed and replaced with a metal shell. The end of the lower leg bone (tibia) is also removed and replaced with a channeled plastic piece with a metal stem.

When surgery is recommended for TKR:

  1. Severe knee pain or stiffness that limits your everyday activities, including walking, climbing stairs, and getting in and out of chairs. You may find it hard to walk more than a few blocks without significant pain and you may need to use a cane or walker
  2. Moderate or severe knee pain while resting, either day or night
  3. Knee deformity — a bowing in or out of your knee
  4. Failure to substantially improve with other treatments such as anti-inflammatory medications, cortisone injections, lubricating injections, physical therapy, or other surgeries. 
Assisting in TKR on my previous hospital is totally different from the hospital where im working now, totally different in a sense that mostly in my previous hospital vendors are allowed to scrub in to help us scrub nurses in assisting surgeon. Mostly they are the one who handed the right instruments to the surgeon and us just the basic instrument. Now in my new working place the whole process of surgery you alone assisting the surgeon and the vendors was just there on a scrub suit acting as somewhat your circulating nurse guiding you.
Before when I'm a nurse incharge (well at that time i have the power to teach) I always tell my students, nurse trainees, junior staff and senior staff that in every procedure you must know the anatomy of all the cases so as to know what part are they(surgeon) going to do and what are the instruments are they going to use on that part 
of the body. Im blogging about TKR so here is the normal anatomy of the knee. 
normal anatomy of the knee
Mostly during TKR surgeon preferred to do first the femoral bone and then the tibial bone, knowing these you will picture it to your mind or set to your mind to prepare all the instruments that are needing for removal of femur bone then the tibia then finished it with cementing placing of implant then suturing.

Things that ill be writing here, the commonly use instruments, consignments, supplies table settings and step by step procedure etc etc... are the one we usually do on our operating theater where im working.



PROCEDURE
TOTAL KNEE REPLACEMENT
POSITION
Supine with TKR foot support
EQUIPMENTS/ACCESSORIES
Torniquet Machine
Suction Machine X 2
Diathermy Machine
SKIN PREPARATION / PHARMACEUTICALS
Cetrimide 1%
10% Povidone with 10% Alcohol
3L Normal Saline for washing using surgilav
INFILTRATION
Refer To Doctors Cocktail Dilution
DRAPES
Disposable Extremity Drape
ABD Pack – placed under the knee during suturing and washing
STEPS IN DRAPING
Mayo Cover (to be used as orthomac)
U-Drape from the set
Dressing Towel to hold the leg
Stockinette (loose)
Elastic bandage + Scissors
Extremity Drape
Loose Mayo Cover (Bridge from OT table to main working table)
INSTRUMENTS SETS / SUPPLEMENTARY SETS / LOOSE INSTRUMENTS
Tibial and Femoral Retractor
TKR Supplementary Set
Large Ortho Basic set
A-Set
Basin X 3
Lambotte Osteotomes
Straight Bone Nibbler
SS Tray
Medium wooden curette
H/C Diathermy
Light Holders
Quiver X 2
Double Prong Retractor (SB)
Bone Punch
ZIMMER Sets (Vendor Sets)
SUPPLIES / CONSUMMABLES
Surgical Marker
Raytec Gauze
Penny Towel
Plain Gauze
Suction Tubing X 2
Hand Control Diathermy
50mls Syringe
Diathermy Scrapper
Disposable Suction Tip X 2
Ioban 6650 X 1
Blade 10 X 5
Crepe Bandage X 3
Surgilav with Handpiece
Trauma tip softcone
Palacos Bone Cement R+G; high viscosity
Cement bowl
Redivac drain 400mls X 1
Specimen Container
Tegaderm X 2 (to seal the hole from disposable suction tip)
SUTURES
Vicryl 1 cutting X 2 (muscle)
Vicryl 2-0 cutting X 2 (fascia)
Monocryl 3-0 X 1 (skin)
DRESSING
Steri-Strip ½ X 2
Large Primapore X 1 (cut one end)
Medium Primapore X 1
Small Primapore (do not cut use to anchor drain)
Plain Gauze
6inches elastic bandage



Settings of the Main Table and Working table for the the vendors set

main trolley set up for TKR

Blades, pins (headed, headless, bullet and golden) and drills use in TKR
instruments use for TKR



Here is the procedure itself in which the surgeon "MIGHT" ask during the procedure. Nurses who are reading this blog should also need to look what are the surgeon doing listen on what are the surgeon asking be attentive and assertive at the same time. This is I know when I'am the scrub nurse this is the way I handed or assist the surgeon in TKR. We might have different way in assisting, and also sometimes surgeon kept changing their plan during the procedure.

TOTAL KNEE REPLACEMENT PROCEDURE 
  1. First Knife to cut the skin
  2. Second knife or the inside knife
  3. Rake Retractor (3rd assist surgeon will help suctioning the op site while the surgeon is cutting)
  4. Surgeon might use Diathermy and Lanes Forceps for hemostasis or use for cutting
  5. Inside Knife (3rd knife) followed by Curve Mayo Scissors to cut the muscles
  6. Inside Knife (4th knife) and Lanes Forceps surgeon will start to collect specimen for histo and culture.
*once the femoral bone and tibial bone are exposed*

(to note all pins needed in femoral bone are headed pins)
Surgeon will start to Femoral Bone
  1. Surgeon might ask Bristol to separate some of the muscles to the bones
  2. Sharp Homman Reractor X 2 to retract the skin and muscle for more exposure of the femoral and tibial bone.
  3. Straight Bone Nibbler to remove the osteomized fragments
  4. Starter Punch followed by mallet to make a small hole into femoral bone and act as a marker for the insertion of first jig. 
    starter punch
  5. Long Drill (create a hole into femoral bone
    first drill
  6. Blunt Homman To expose the femoral bone
  7. Handed the first jig followed by the 3rd degree rotation they will insert this to the hole that they made, surgeon might re drill again (first drill) or he might use mallet. 
    first jig and 3rd degree rotation
  8. Small Drill 
    second drill to drill the hole into 3rd degree rotation
  9. T-Handle to remove the First Jig 
    T-Handle
  10. Second Jig then give 2 headed pin plus mallet handed the stylus followed by ochsner just to tighten or lock the screws. surgeon will check if it is correct measurement and placement give the sea guide. 
    second jig, stylus, sea guide
  11. Surgeon might ask nibbler and sharp homman
  12. Third Jig check if you handed the right position of the jig. So you must know if the operative site is left or right. 
    3rd jig check the correct placement
  13. Ochsners to remove the stylus
  14. 3 Headed Pin followed by mallet each pin
    headed pin
  15. Extractor - surgeon might removed some other pin. 
    extractor
  16. Standby staight osteotome size 20 surgeon might ask for it
  17. Big Saw
  18. Extractor - to remove the third Jig
  19. Femoral Sizer - surgeon will now determine on what size he will be using on his femoral implant.  
    sizer
  20. MIS Femoral finishing comes in different sizes usually from B to E you need to screw in the triangular template. 
    you will need screw driver on this stuff
  21. Headed Pin X 2 followed by mallet
  22. Hexagonal Screw driver to removed the triangular template
  23. Drill (rounded shape) 
    drill
  24. starter punch with bullet X 2 surgeon might use mallet. 
    load the bullet to starter punch
  25. Small Saw then Big Saw after. 
    small saw
  26. Extractor To removed the headed pins
  27. T-Handle to removed the MIS Femoral Finishing
  28. Surgeon might ask for the Straight Osteotome size 20 to remove the cut bones.
Tibial Bone
  1. Tibial jig. 
    this must be assemble to appear like this
  2. Man on a boat 
  3. Golden pin X 2 followed by mallet (golden pin was placed in to hold the 7 degree (right/left) jig.
  4. Sea guide - to check the level of femur
  5. Ochsner X 2 to hold on the golden pins
  6. U-Shape thing followed by the allignment rod. - to check the allignment of the bone 
    the u shape thing is inserted to 7 degree  by the surgeon
  7. Big Saw
  8. Surgeon might ask for the broad straight osteotome size 25 or straight nibbler to remove the bone
  9. Spacer Block to check the spacing of femoral and tibial implant it comes in different sizes (prepare 9,10 and 12) 
    spacer block
  10. Sharp Homman 
  11. Golden Pin Puller 
  12. Surgeon might ask for the small saw and osteotome
  13. Curette
  14. Sea Guide 
  15. Small Laminar Spreader
  16. Small Curved Osteotome to remove some bones on femur he might use mallet
  17. He might going to check again the allignment, so he will be using spacer block and allignment rod.
  18. All in one (fifth jig) (Back to femoral bone) 
  19. Bullet pin on a starter punch X 2 followed by mallet
  20. headed pin X 3 followed by mallet each pin
  21. Small Saw he might use straight osteotome size 20
  22. Oscillating Saw
  23. Extractor to remove the pins
  24. surgeon might use mallet
  25. He might use the osteotome again and rongeur to remove the bone. The surgeon then will ask to save the bone the he just remove to use for the later part.
  26. Surgeon might use bone file
  27. Femoral Temporary Implant (comes in different sizes give the correct size in which he ask before) 
    when giving femoral temporary implant give also the femoral punch followed by mallet
  28. mickey mouse plate with handle plus the AP sizer (comes in different sizes with correspondent color) (femoral temporary implant and mickey mouse plate with AP sizer was use to check the correct implant that they will be using). 
    at first serve the plate with the handle plus the AP sizer (yellow) at a later part just give the plate 
  29. Sharp Homman to removed the AP sizer 
  30. Femoral Extractor to removed the Femoral Temporary Implant 
  31. Mickey mouse / tibial plate 
    some surgeon doesn't need the handle
  32. Headless pins on ochsners X 3 
  33. Starter Punch followed by mallet to punch in the headless pins
  34. Mickey mouse 
  35. Drill (big)
  36. Brooch (6th jig)
  37. Mallet to punch in the brooch
  38. T-Handle followed by Mallet to removed the brooch
  39. Headless pin remover or pin puller to removed the headless pins
  40. Tibial Trial (comes in different sizes) color white followed by tibial punch
    tibial trial (white) tibial punch and mallet
  41. AP sizer (mostly yellow) 
  42. Femoral Temporary Implant 
  43. Femoral punch followed by mallet. (placing all the tibial trial femoral temporary implant and the AP sizer surgeon is making sure that he will placed the correct size of the implant if he is certain about that the vendor then can open the necessary implant needed by the patient).
  44. T-Handle followed by mallet to removed the tibial plate (white) but sometimes surgeon removed it manually.
  45. Femoral Extractor to removed the femoral temporary implant.
  46. WASH the operative site before placing the implant. before hand you will ask the surgeon if he needed to give cocktail because sometimes after washing surgeon injected pain reliever and antibiotics on patient knee. But if the patient went to anesthesia block surgeon wont give any cocktail. During washing nurses prepared all the things needed for cementing.
THINGS TO PREPARE FOR CEMENTING AND IMPLANT:
On your SS Tray:

  1. Femoral Punch
  2. Tibial Punch
  3. Mc Donald
  4. Articular Surface or spacer or INSERTER
  5. Gillies non tooth
  6. He might or not need wet gauze.


Mixing of cement, ask the surgeon first if it is okay to mix the cement. The circulating nurse then need a timer to time the mixing of cement. The timing will start once the scrub nurse pour in the solution to the cement powder form. The scrub nurse will mix the cement in one direction up until 1 minute, by then cement is ready. Wet the surgeon gloves with normal saline Serve an ample of amount of cement to surgeon to place on patient tibial bone and tibial implant plate give the tibial punch and mallet. non tooth gillies or mc donald to removed the excess cement. Next serve again cement to surgeon, surgeon then place the cement on patient femoral bone plus the femoral implant. Give the femoral punch followed by mallet, same thing non tooth gillies and mc donald to removed excess cement. Every minute the scrub nurse will announce the timing to the surgeon, it takes for about 10-15 minutes that the cement is fully harden. After implanting surgeon then will placed redivac drain. Close the knee using Vicryl 1 for muscle Vicryl 2-0 for fascia and Monocry 3-0 for skin they will use steristrip close with primapore and plain gauze and wrap with elastic bandage 6 inches. Drain will clamp for 6 hours.

Again this are the things I usually do and prepare when I scrub in TKR. We have a lot of ortho doctors who doesn't follow this, they have their own technique meaning others that are written here are not accordingly to them. For those who have read this especially to all my colleagues feel free to comment, add something if there is something that i have not written here or say something that it should be not written here.

Thank you for reading i hope this will help you and will blog some other op procedures..=)

6 comments:

  1. Nice blog and thank for sharing this content. Get knee replacement surgery in India with top notched techniques.Check our website and get the more details of knee replacement surgery.

    ReplyDelete
  2. Osteoarthritis patients are often prescribed medications, physical therapy and exercises at the primary level. Knee Replacement is recommended only when there is no relief from these techniques or when the movement is totally restricted because of severe pain and inflammation.

    ReplyDelete
  3. I'm glad I found this web site, I couldn't find any knowledge on this matter prior to.Also operate a site and if you are ever interested in doing some visitor writing for me if possible feel free to let me know, im always look for people to check out my web site.
    best-knee-scooters

    ReplyDelete
  4. Endoscopic spine and joint replacement surgey in Punjab. The best Centre, Kalyan Hospital provide knee replacement in Punjab , all joint replacement and each and every cases of knee pain and Ortho treatment In Punjab.
    Knee replacement Surgery with modern technique and expert team in Kalyan hospital Ludhiana,Punjab,India.

    ReplyDelete
  5. Informative blog, Dr. Shailendra Patil Vashi is one of the leading knee surgeons in Mumbai. Apart from knee replacements, he also treats problems in hip and shoulder joints. Thanks for sharing

    ReplyDelete
  6. Osteoarthritis patients are regularly endorsed meds, active recuperation and activities at the essential level. Total Knee Replacement is suggested just when there is no alleviation from these procedures or when the development is completely confined in light of extreme torment and aggravation.

    ReplyDelete